→

FIT-U PRO Upper-Limb Exoskeleton | Powered Shoulder & Arm Support for Overhead Work

Powered upper-limb exoskeleton for overhead work and sustained tool holding. Independent 10–20 kg assist per arm, 3.9 kg frame, 36 V quick-change battery with 3–8 h runtime. Price: quoted on request — confirmed against specification, quantity and shipping terms (FOB Shanghai or CIF destination port).

Description

FIT-U PRO is a powered upper-limb exoskeleton that supports the shoulder and arm during overhead work, sustained holding and repetitive tool use. Separate drive units assist each arm independently, cutting the physical strain of raised-arm tasks by more than 50%, which is the usual cause of early fatigue and shoulder complaints on assembly lines and at height.

Arm assist10–20 kg per arm
Unit weight3.9 kg
Battery36 V lithium, 3–8 h
Degrees of freedom8
Working temp.-20 ℃ to 50 ℃
Need a quotation against your list?

Send quantities, model preference and destination port. We confirm specification and reply with a line-by-line quotation.

Product and application images

Frame, battery and dual drive units, plus overhead work in use.

FIT-U PRO upper-limb exoskeleton
FIT-U PRO upper-limb exoskeletonShoulder frame, dual drive units, waist belt and quick-change battery.
Battery pack and drive units
Battery pack and drive unitsQuick-release 36 V lithium pack on the back frame; left and right arms assist separately.
Rear view and harness
Rear view and harnessChest and waist straps distribute the frame weight; sizing is adjustable.
Overhead work support
Overhead work supportAssist follows the raised-arm phase during drilling, fixing and inspection work.

Specification

Model FIT-U PRO (upper-limb exoskeleton)
Device size (600–680) × 572 × 220 mm (L × W × H)
Device weight 3.9 kg
Power source Electric drive, 36 V lithium battery
Assist force 10–20 kg per arm, independent left/right control
Working time 3–8 h per charge, quick-release battery
Working temperature -20 ℃ to 50 ℃
Degrees of freedom 8
Material Nylon engineering plastic, high-strength aluminium alloy, carbon fibre
Control Motion control unit with dual position feedback and force-sensor interface
Fit range Adjustable frame and straps for different operator sizes

Typical applications

Overhead assembly and fixing, drilling and inspection, airport ground handling, wind-energy maintenance, emergency rescue, construction fit-out and automotive line work — tasks where tools are held above shoulder height.

Frequently asked

Which tasks benefit most?
Work with the arms raised or held steady: overhead drilling, ceiling and façade fixing, inspection, and long holding of tools or parts. For pure floor-level lifting the lumbar model is the better fit.
Are both arms assisted equally?
Each arm has its own drive unit and can be set separately, so a right-handed operator can run a higher level on the working arm.
What is in the set?
Shoulder frame with two drive units, chest and waist harness, 36 V lithium battery and charger, English manual.
Can it be worn over work clothing and PPE?
Yes. The frame is worn over standard workwear; the harness is adjustable and leaves the hands free.
Documentation and warranty?
CE documentation and test records are provided where required, with one-year warranty on the drive unit and spare parts available afterwards.
Planning a fleet purchase?

Send operator count, task description and site conditions. We confirm the model mix, battery plan and spare-parts set, then quote line by line.

Reviews

There are no reviews yet.

Be the first to review “FIT-U PRO Upper-Limb Exoskeleton | Powered Shoulder & Arm Support for Overhead Work”

Your email address will not be published. Required fields are marked *

Related products